Canon FAX-L160 Reference Manual page 117

CHECK DOCUMENT
Description A document jam may have occurred in the ADF.
Action Remove the jammed document.
Description The document is longer than 400 mm.
Action Reduce the length of the document to less than 400
mm, then try again.
CHECK DESTINATION
Description The fax number entered at the second time is different
from the one entered at the first time.
This message appears when <CONFIRM FAX NO.> is set
to <ON> in the <ACCESS TO DEST.> of the <SYSTEM
SETTINGS> menu.
Action Check if the fax number is correct, then enter the same
fax number as the first one after pressing [Start].
CHECK SCANNING AREA
Description The scanning platform is dirty, or not set into scanning
position.
Action Clean the scanning area, or lift the scanning platform
into place.
CLOSE COVER
TONER COVER
Description The toner cover is not closed completely.
Action Check the toner cover, and make sure that it is
completely closed.
HANG UP PHONE
Description The optional handset or the handset of the external
telephone is off the hook.
Action Hang up the optional handset or the handset of the
external telephone.
INITIALIZING...
Description This message appears when connecting the power cord,
or when the machine is not ready for printing.
Action Wait until the message disappears.
LOAD CORRECT PAPER
Description The size of the paper in the paper feeder is different
from that of the paper specified in <CASSETTE> of the
<PAPER SETTINGS> menu.
Action Load the correct size paper or change the paper size
in <CASSETTE> of the <PAPER SETTINGS> menu. For
more information, see "If <LOAD CORRECT PAPER> is
displayed," on p. 8-17.
LOAD PAPER
Description No paper is loaded in the paper feeder.
Action Load paper correctly. Then press [OK] when
using the paper feeder.
8-11