Menu: Volume (For Message Receipt) - Mitel 600 User Manual

1. In idle mode, briefly press the
messages > Message options > Melodies or Audio >
Ringer settings > Melodies.
2. Select one of the following entries: Normal message, Ur-
gent message, or Alarm message.
3. Press the Change softkey to change the currently as-
signed melody.
Press the
4. Press the
5. Briefly press the end key
Note: To ensure you notice the receipt of low priority
messages (signaled by a short "beep"), enable the
Confirm tones setting in the Audio > Attention tones
menu.

MENU: VOLUME (FOR MESSAGE RECEIPT)

Received messages can be signalled with different volume
settings. To distinguish message receipt from other call types,
select volume settings for message notifications other than
settings for, for example, for incoming calls. Check the settings
in the Audio > Ringer settings > Volume menu.
1. In idle mode, briefly press the
messages > Message options > Volume or Audio >
Ringer settings > Volume.
The current ringer volume is displayed.
2. Select one of the following entries: Normal message, Ur-
gent message, or Alarm message.
If the ringer is switched off, the menu line is grayed. You
can change the volume but the indication remains Off
unless the ringer is switched on again.
Setting Options for Messages Receipt
softkey to listen to the melody before saving.
softkey to save the melody.
softkey. Select Text
to close the menu.
softkey. Select Text
29