Mitel 600 DECT Phone Messaging and Alerting Applications
The status of the messages is displayed by different icons:
In progress (message is on the way)
Message was successfully sent.
Send operation failed
Message info and options
You can display the complete message in the Outbox list via
the
softkey or call up further options (e.g., forward message)
via the
MENU: USE LAST TEXT
The handset stores the last entered text (message text and
address) in a temporary buffer. This may help you if:
•
You have closed the message editor by pressing the Esc
softkey (e.g., to make an outgoing call before completing
the message).
•
A message transfer failed, and you want to repeat the
transfer.
•
You want to send the same information to a different
recipient.
To send a message using the last entered text, proceed as
follows:
1. When idle, briefly press the
Text messages > Use last text menu entry.
2. Press Ok. The display shows the text editor. Edit the mes-
sage text if necessary (see "Text Editor" on page 20).
3. Press the Next softkey. The display switches to the ad-
dress editor showing the address of the recipient to whom
the last text was sent.
22
softkey – see "Using the Options Menu" on page 25.
softkey. Navigate to the