Sending Vcards; Receiving Vcards - Mitel 600 User Manual

1. In idle mode, press and hold the
System menu, or briefly press the
the System menu.
2. Select Receive vCard and press Ok.
3. Press Ok to confirm Switch on. You receive the Is on
confirmation.
Confirm Switch on with Ok, you receive the Is on confirmation.

SENDING VCARDS

1. In idle mode, open the personal directory using the bottom
navigation key.
2. Select the desired directory entry and press the
softkey.
3. Select Send and press Ok.
4. Select from the following:
• vCard of entry <Name>: sends the directory entry
selected
• vCards <all entries>: sends all directory entries
5. Press Ok to confirm your selection.
6. If necessary, use the
when entering an address and enter the call number of the
recipient.
7. Press Send and confirm with Yes.

RECEIVING VCARDS

When you receive vCards the display shows "vCard / Personal
directory / Name / Number (FAC)". The vCard data is
automatically stored into the directory.
Note: vCards can also be sent by the system server in
your VIP list.
Special Functions
softkey to access the
softkey and select
key to switch to numeric entry
37