Installation Of The Battery Back-Up; Connecting The Battery Back-Up - Ever Power Systems POWERLINE 11 series Instruction Manual

INSTALLATION OF THE BATTERY BACK-UP

When choosing the installation spot you must take the device's weight into account.
The back-up should only be used in rooms whose dustiness, temperature and
moisture levels conform with the device's specification. In order to ensure correct
operation of the back-up, appropriate cooling conditions for the device must be
provided. For this reason the ventilation openings on the back-up's case must be
uncovered and the distance between the back-up and other objects should be kept
according to the guidelines (technical parameters table).
WARNING! The device must not be installed close to flammable
materials!

CONNECTING THE BATTERY BACK-UP

The connection should meet the requirements concerning the cable cross-sections
and installed safeguards – cf. technical parameters table.
WARNING! Connecting of the battery back-up to the mains should
be performed only by a qualified and authorised personnel.
WARNING! The battery back-up is disconnected from the mains
only when the power cord is removed from its socket.
It is recommended that the safety circuits of the building function as one of the
protection measures. Their parameters should be adjusted to the type and
dimensions of the load connected to the installation (technical parameters table).
2011/07/22
POWERLINE 11 series UPS – Instruction Manual
www.ever.eu
10