Page 1
Orbis KONFERENZSYSTEM CONFERENCE SYSTEM SYSTÈME DE CONFÉRENCE SISTEMA DE CONFERENCIAS Kurzanleitung Quick Start Guide Guide de démarrage rapide Guía Quick Start...
Page 3
Orbis – Quick Start Guide Deutsch ..........4 English .
Page 4
Orbis – Quick Start Guide Thank you for selecting the Orbis conference system from beyerdynamic. Please take some time to read carefully through this manual before setting up the equipment. Please refer also to the extensive “Orbis Conference System” manual on the supplied data medium or on the internet at www.beyerdynamic.com.
Page 5
µ Connection for microphone units line 1, RJ45 (Warning: No Ethernet Connection) ¸ Connection for microphone units line 2, RJ45 (Warning: No Ethernet Connection) ¹ 48 V DC connection for power supply unit Important: Only use the power supply unit supplied by beyerdynamic. Reset to restore the factory settings...
Page 6
Orbis – Quick Start Guide Orbis MU 23 / MU 21 Desktop Microphone Units Bottom Lateral View Orbis MU 23 – Top View Orbis MU 21 – Top View Thread to attach the microphone unit on a Opening for unlocking the gooseneck...
Adjust the volume via the amplifier or mixing console. • The Orbis conference system is configured via the rotary encoder on the front of the Orbis control unit. By pressing and turning you can enter the individual menus to select and store settings by pressing and turning as well.
Page 8
Orbis – Quick Start Guide Cable outlet downwards Cable outlet backwards • If the connecting cables of the Orbis MU 23/21 • If the connecting cables of the Orbis MU 23/21 microphone unit are to be routed downwards, microphone unit are to be routed backwards,...
Page 9
Orbis – Quick Start Guide Connection of microphone units with redundancy • For maximum reliability of the system, the microphone units/system units are connected in a ring to the control unit. As cables use standard CAT5e cables (S/UTP, min. AWG 26 diameter or better).
Page 10
Function button: Depending on the configuration via the Orbis CU control unit the function button has the function “Normal” or “Mute” or “Function” when configured via an external media control system.
Need help?
Do you have a question about the Orbis and is the answer not in the manual?
Questions and answers