System Speed Dial; Last Number Dial - Lucent Technologies Merlin Communications System User Manual

System Speed Dial

Your administrator may assign System Speed Dial codes
#60 through #89 and #900 through #999 to telephone
numbers that people in your system call often, such as
vendors or clients. You can program any of these codes
on buttons for one-touch dialing. Ask your
administrator for a list of System Speed Dial codes.
To program a System Sped Dial button:
Label a button and follow these steps:
•
T P
Main
Office

Last Number Dial

You can program a button for one-touch redialing of the
last number you called.
To program:
Label a button and follow these steps:
•
T P
Last No.
•
T P
60-89
95
900-999
•
T P
72
To place a call:
1 If you have a button programmed with this code,
touch the button. If not, dial the pound sign and
code (#60 through #89 and #900 through #999).
To use Last Number Dial:
1 Touch Last Number.
2 If someone answers, begin to speak or lift your
handset. If no answer, touch Speakerphone (or
Speaker) to disconnect.
7