Lucent Technologies Merlin Communications System User Manual page 7

Adjust the ringer volume of your voice terminal's
1
speaker with the volume control.
Use the dial pad to place calls. In programming
2
mode, use it to enter codes and data.
3 Use Conference, Drop, Transfer, and Hold for
efficient call handling.
Test your voice terminal and program its features by
4
sliding the T/P switch to T (Test) or P (Program),
5 Use line buttons to call people who aren't connected
to your system.
6 Use the display buttons to operate clock, calendar,
timer, and alarm functions.
Adjust the contrast on the display.
7
Use the information on the display as you handle calls
8
and messages and program your voice terminal.
* The BIS-34D is the largest of the MERLIN Plus system voice terminals. Other models have buttons, but the features they have are located
in the same positions as on the BIS-34D shown above.
9 Tailor your voice terminal to meet your individual
needs by programming available buttons with custom
features.
10 Adjust the volume of the speakerphone.
11 The Speakerphone feature allows you to have a phone
conversation without using the handset. The
Speakerphone light indicates when the feature is
activated.
12 Touching the Microphone button while you're on a call
enables you to have a private side conversation with
someone in your office without the caller overhearing
it. The Microphone light indicates when the feature is
activated.
13 HFAI enables you to answer intercom calls hands free.
The HFAI light indicates when the feature is activated.
14 If the Message light is on, call the attendant for your
messages.
5