Saved Number Dial - Lucent Technologies Merlin Communications System User Manual

Saved Number Dial

You can program a button to redial a telephone number
that you've saved.
To Program:
Label a button and follow these steps:
•
T P
S a v e d
Number
Busy Buster
You can program a button to have the system redial a
busy telephone number automatically and signal you if
the call goes through, if this feature has been
administered on your system.
When activated, Busy Buster will redial the busy number
up to 15 times at 30 second intervals.
To program
Label a button and follow these steps:
•
T P
Busy
Buster
•
T P
74
•
T P
31
To use Saved Number Dial:
1 Before disconnecting, touch Saved Number.
2 To redial the call, touch Saved Number.
3 If someone answers, begin to speak or lift your
handset. If not, touch Speakerphone (or Speaker) to
disconnect.
To use Busy Buster:
1 Before you disconnect, touch Busy Buster.
2 When you hear ringing, the signal that the call has
gone through, touch Speakerphone (or Speaker) or
lift your handset.
IMPORTANT: Answer returning Busy Buster calls
promptly when your voice terminal alerts you.
Otherwise, the called party may become confused by
the silence caused by the delay and hang up.
To turn off Busy Buster:
1 Touch Busy Buster.
8