Lucent Technologies Merlin Communications System User Manual page 11

Remote Line Access (RLA)
When the system is in the RLA mode you can call in
from a remote location and enter a password to gain
the system's outside lines.
access to one of
To program:
with a green light and follow these
Label a button
steps:
•
T P
PLA
•
T P
84
To use RLA:
If the system is in RLA mode, go to the next step. If
1
the system is in either CF or DXD mode, after the
introductory message, dial *#*.
2 From a remote location, dial the telephone number of
a line in the RLA incoming line group.
When requested, enter the 5-digit password.
3
4 When requested, enter a line number between 1 and
8 of the outside line you want to make your call on.
Dial the telephone number you are calling plus a
5
pound sign.
Complete your call as usual.
6
9