Hard Disk Passwords - ThinkPad S440 User Manual

4. Depending on your need, do one of the following:
• To set a password, do the following:
a. In the Enter New Password field, type a desired password and press Enter.
b. In the Confirm New Password field, retype the password and press Enter.
• To change a password, do the following:
a. In the Enter Current Password field, type the current power-on password and press Enter.
b. In the Enter New Password field, type the new power-on password and press Enter; then retype
the password in the Confirm New Password field and Press Enter.
• To remove a password, do the following:
a. In the Enter Current Password field, type the current power-on password and press Enter.
b. Leave the Enter New Password and Confirm New Password fields blank. Press Enter twice.
5. A Setup Notice window is displayed. Press Enter to continue.
6. Press F10. A Setup Confirmation window is displayed. Select Yes to save the configuration changes
and exit.
Note: You might want to record your password and store it in a safe place. Otherwise, if you forget the
password, you have to take your computer to a Lenovo reseller or a marketing representative to have
the password canceled.

Hard disk passwords

The following two types of hard disk passwords can help protect the information stored on the hard disk drive:
• User hard disk password
If a user hard disk password has been set, but no master hard disk password has been, the user must
enter the user hard disk password to access files and applications on the hard disk drive.
• Master hard disk password
The master hard disk password also requires a user hard disk password. The master hard disk password
is usually set and used by a system administrator. It enables the administrator to access any hard disk
drive in a system like a master key. The administrator sets the master password; then assigns a user
password for each computer in the network. The user can then change the user password as desired, but
the administrator still can get access by using the master password.
When a master hard disk password is set, only the administrator can remove the user hard disk password.
Setting a hard disk password
Before you start, print these instructions.
To set a hard disk password, do the following:
1. Turn off your computer. Wait for about five seconds, and then turn on the computer again.
2. When the logo screen is displayed, press F1 to start the ThinkPad Setup program.
3. Select Security ➙ Password ➙ Hard disk 1 Password by using the directional keys.
4. A password window is displayed. You are prompted to select User or User + Master. Select User if
you want to set only one hard disk password. Select User + Master if you want to set a user hard disk
password and a master hard disk password, for example if you are an administrator or a supervisor.
• If you select User, do the following:
a. When a window for typing the new password opens, type your new password in the Enter New
Password field and press Enter.
46
User Guide