Using The Extend Desktop Function - ThinkPad S440 User Manual

12. Clear the Show compatible hardware check box.
13. Select the correct manufacturer and model for the external monitor. If you cannot find your monitor on
the list, stop the installation of this driver and use the driver shipped with your monitor.
14. After updating the driver, click Close.
Changing the color settings
To change the color settings, do the following:
For Windows 7:
1. Right-click on the desktop, and click Screen resolution.
2. Click Advanced Settings, select the Monitor tab, and then set Colors.
3. Click OK.
For Windows 8 and Windows 8.1:
1. Right-click on the desktop, and click Screen resolution.
2. Click Advanced Settings, and then select the Color Management tab.
3. Click Color Management, and then select the Advanced tab.
4. Change the color settings as you desired, and then click Close.
Considerations for connecting an external monitor
• When installing an operating system, you must install the display driver for your monitor that is provided
with the computer, and the monitor INF file that is provided with the external monitor.
• If you set a resolution higher than the resolution you are using on the computer monitor, and use an
external monitor that does not support that resolution, take advantage of the virtual screen function,
which enables you to display only a part of the high-resolution screen image your computer produces.
You can see other parts of the image by moving the screen with the TrackPoint pointing device or another
pointing device.
• If the external monitor you are using is outdated, the resolution and the refresh rate might be limited.

Using the Extend desktop function

Your computer supports the Extend desktop function. With the Extend desktop function, you can display
output on both the computer display and an external monitor. You also can display different desktop
images on each monitor.
You can use the Extend desktop function without changing any settings. If the function does not work, refer
to "Enabling the Extend desktop function" on page 37.
Considerations for using the Extend desktop function
• If you want to show DOS full-screen while in Extend desktop mode, only the primary display shows
DOS; the other display is blacked out.
• If your computer has the Intel
following:
1. Press Ctrl+Alt+Fn+F12. The Intel Graphics and Media Control Panel window opens.
2. Select Advance Mode and click OK.
3. Click Multiple Display.
4. Select the desired display as the primary display.
36
User Guide
®
graphics card, you can designate the primary display by doing the