ThinkPad X200 User Manual
Hide thumbs
Also See for X200:
- Hardware maintenance manual (294 pages) ,
- Hardware maintenance manual (260 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for ThinkPad X200
Summary of Contents for ThinkPad X200
- Page 1 ThinkPad X200 Tablet...
-
Page 2: Status Indicators
Status indicators This chapter presents the system status indicators that show the status of the computer. © Copyright Lenovo 2008, 2009... - Page 3 Green: The computer is connected to the ac power supply. status Sleep (standby) Green: The computer is in sleep (standby) mode. status Blinking green: The computer is entering sleep (standby) mode or hibernation mode, or is resuming normal operation. ThinkPad X200 Tablet...
-
Page 4: Fn Key Combinations
When you press this combination, a panel for selecting a power plan (power scheme) appears. Notes: 1. To use the Fn+F3 key combination, you must have the ThinkPad PM device driver installed on the computer. 2. If you have logged on with an administrator user ID, and you press Fn+F3, the panel for selecting a power plan (power scheme) appears. - Page 5 Open the ThinkPad EasyEject Utility screen. Buttons for the following choices are displayed: v Eject ThinkPad PC from UltraBase: This button is displayed only if the ThinkPad computer has been attached to a ThinkPad X200 UltraBase. The computer can be detached from the ThinkPad X200 UltraBase.
- Page 6 Fn+F12 Put the computer into hibernation mode. To return to normal operation, press the power button for less than four seconds. Note: To use Fn+F12 for hibernation, you must have the ThinkPad PM device driver installed on the computer. Fn+Home The computer display becomes brighter.