Table of Contents
Advertisement
3. Set the value of an item by doing one of the following:
• Press the F6 key to change to a higher value.
• Press the F5 key to change to a lower value.
Note: Default values are in boldface.
4. To change other configurations, press the Esc key to exit the submenu and return to the parent menu.
5. When you complete the configuration, press the F10 key to save and exit. You also can select the
Restart tab in the ThinkPad Setup menu, and restart your computer with one of the provided options.
Note: You can press the F9 key to restore to the default settings.
Main menu
When you enter the ThinkPad Setup program, you will first see the Main menu as follows:
• UEFI version
• UEFI date
• Embedded controller version
• Machine type model
• System-unit serial number
• System board serial number
• Asset tag
• CPU type
• CPU speed
• Installed memory
• UUID
• MAC address (Internal LAN)
• Preinstalled operating system license
• UEFI Secure Boot
Config menu
To change the configuration of your computer, select the Config tab from the ThinkPad Setup menu.
The following table lists the Config menu items.
Attention: The default configurations are already optimized for you. Improper change of the configurations
might cause unexpected results.
Table 4. Config menu items
Menu item
Network
82
User Guide
Submenu item
Wake On LAN
Selection
• Disabled
• AC Only
• AC and Battery
Comments
Enable the system to Power on
when the Ethernet controller
receives a magic packet (a
special network message).
If you select AC Only, the Wake
on LAN function is enabled only
when the ac power adapter is
attached.
Advertisement
Table of Contents
