Table of Contents
Advertisement
Linear Acoustic AERO.ASI User Guide
Chapter 2: Remote Interface
The AERO.ASI is currently controlled exclusively via the Remote Interface software. The front panel
OLED displays software version, host name, and IP address, and the navigation controller is not yet
used. The reasoning behind this will be apparent after using the unit for a short period.
The Remote Interface software is a separate client application that can be downloaded and installed
on most recent desktop, laptop, or tablet PCs running Windows XP, Vista, or 7. Touchscreen support
is provided for touch-sensitive devices.
All AERO.ASI parameter adjustments must be made via the remote client. The remote can also stream
high quality audio back over the local network to the host computer so different processor patch
points can be monitored in real-time. With appropriate high speed connectivity to the local network,
offsite remote control and real-time audio monitoring is also possible. This enables, for example,
checking station groups from a single location, or checking a single station when you inevitably find
yourself awake and bored at 3AM.
2.1
Setup
1. Insert the supplied USB key into the computer you wish to install the remote on, or download
it from LinearAcoustic.com.
Click the link to the right of the Remote Interface software installer to download it.
2. Copy the installer to a folder or directly onto the desktop.
3. Launch the installer and select from the three options: Cmd Line Help, Just Run, or Install.
Normally, just choose Install, which installs the Remote software as a Windows program.
Figure 2-1 Remote software installer (V2.20.23 or later)
31
Advertisement
Table of Contents
