Settings For The Selected Rta - Linear Acoustic AERO.ASI User Manual

Linear Acoustic AERO.ASI User Guide
From this menu, you can
• turn displays on and off;
• select the information to display in each: processing meters for DRC 1, 2, and local engines;
AC-3 confidence decoding information; I/O meters for each processing instance; I/O meters
for the hardware.
AERO.ASI offers the following signal analysis tools:
• Over-sampled digital oscilloscope
• RTA (real time analyzer)
• FFT spectrum analyzer
These valuable monitoring and diagnostic tools can measure and display signals from myriad patch
points within AERO.ASI. Extensive setup controls are provided for these meter types.
Figure 2-8 Settings for the selected RTA
36
Remote Interface