Dvb-Asi Setup; Dvb-Asi Source For Each Instance; Dvb-Asi Output Selection - Linear Acoustic AERO.ASI User Manual

Linear Acoustic AERO.ASI User Guide Introduction to AERO.ASI
1.6

DVB-ASI Setup

Activating processing is as simple as setting a PID number and enabling Insertion. The AERO.ASI
comes pre-configured to decode up to four ASI programs: Instance 1 source is ASI 1, Instance 2
source is ASI 2, etc...
Figure 1-17 DVB-ASI Source for each Instance
Each ASI program then comes from each of the instances: ASI Out 1 comes from Instance 1 Encoder
out, ASI Out 2 comes from Instance 2 Encoder Out, etc...
Figure 1-18 DVB-ASI Output Selection
24