Record Configuration - Okina HDRS-04-1U User Manual

Setup mask area: click Setting button, enter into live image to press left mouse and drag mouse to set mask area,
refer to below picture. Click Apply button to save the setting.
Delete mask area: select a certain mask area, click left mouse to delete that mask area, click Apply button to save
the setting.
Notice: The mask area will not be recorded on DVR. Please use this function carefully.

4.3 Record configuration

Record configuration includes five sub menus: enable, record bit rate, time, recycle record and stamp.
4.3.1 Enable
Step1: enter into system configurationrecord configurationenable; refer to Fig 4-11:
Step2: tick off record, audio and record time
Step3: user can setup all channels with same parameters, tick off "all", then to do relevant setup.
Step4: click "default" button to resort default setting; click "apply" button to save the setting; click "exit" button
to exit current interface.
Definitions and descriptions of Record:
Parameter
Record
Audio
DV-8_HDRS-04-1U / DV-9_HDRS-08-2U / DV-10_HDRS-16-2U User's Manual
Setup mask area
Live image mask area
Fig 4-11 record configuration-enable
Record switch of every channels
Enable live record audio
15
Meaning
R201304-V10