Device Phone Number; Using Connection Manager To Install Drivers And Connect To The Carrier Network - Multitech QuickCarrier MTD-H5 User Manual

Usb-d
Hide thumbs Also See for QuickCarrier MTD-H5:
Table of Contents

Advertisement

GETTING STARTED
2.
Suspend ModemQuery.
3.
Wait for Steps 1-2 to complete.
4.
Verify that the modem has disconnected.
5.
Issue AT#SHDN and wait for OK. Wait 30 seconds after the OK before unplugging or removing power.
6.
Disconnect the device from the USB port.

Device Phone Number

Every device has a unique phone number. Your service provider supplies a phone number when you activate your
account, or if your device has a SIM card, the phone number may be on it. Wireless service provider
implementation may vary. Consult with your service provider to get the phone number for your device.
Using Connection Manager to Install Drivers and Connect to the
Carrier Network
Connection Manager is software that installs device drivers and connects your device to your carrier's network.
Note:
MTD-H5 models use SIM based activation. If you do not have a SIM card, contact your carrier.
Connection Manager supports the following Windows versions:
Windows XP, Vista, 7, 8 and 2008, both 32-bit and 64-bit versions
Windows Server 2012
Windows 2003 Server 32-bit version
To download and install the Connection Manager:
1.
Go to www.multitech.com/connectionmanager.go.
2.
Click Connection Manger.
3.
Open or unzip the Connection Manager file and run the installer (.msi file).
4.
When prompted, plug the device into a USB port.
5.
Wait for drivers to install, then click Next.
6.
Open Connection Manager.
7.
To set the application to load during Windows startup and automatically connect to the internet:
a.
Click Settings and check the boxes for Run application at Windows startup and Connect to the
Internet Automatically.
b.
Click Apply.
8.
To allow Connection Manager to re-connect when a connection is lost:
a.
Click Connection and check Enable keep-alive.
b.
Enter an address to ping in the Host to ping box (for example, 8.8.8.8 which is www.google.com).
9.
Enter Dial number and APN if different from the default.
10.
Click Apply to save settings.
11.
Click Main, then click Connect to start your connection.
12.
Browse to a website to confirm the device has Internet access.
14
TM
QuickCarrier
USB-D MTD-H5 User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QuickCarrier MTD-H5 and is the answer not in the manual?

Questions and answers

Table of Contents