Table of Contents
Advertisement
GETTING STARTED
Getting Started
Getting Started Overview
To use the MTD, do the following:
1.
Insert the SIM Card. Refer to Installing a SIM Card.
2.
Power up the device. Refer to Turning the Device On or Off.
3.
Install device drivers. Use the Connection Manager or follow instructions in the USB Driver Installation
Guide for your model.
4.
Activate the device on your carrier network. Use the Connection Manager or refer to Account Activation
for Cellular Devices.
5.
Make a data connection. Use the Connection Manager or refer to Using Linux and/or Basic Operations.
Installing a SIM Card
To install a SIM Card in an MTD-H5:
Warning:
If the device is connected to a computer or power supply, disconnect it. Inserting or removing a SIM
card with the device powered may harm the SIM card and the device.
1.
Remove the SIM cover from the back of the device. If you have trouble sliding the SIM cover, use a flat-
blade screwdriver in the slot on the SIM cover to slide it out.
2.
Insert the SIM card into the card holder with the gold contact side facing down as shown.
12
TM
QuickCarrier
USB-D MTD-H5 User Guide
Advertisement
Table of Contents
