Configuring Reminders And Alerts; Furnace Filter - Ecobee Smart Si Installation Manual

To configure Reminders
and Alerts
From the Home screen,
press MENU.
Reminders and
Select
Alerts.
Configure the Reminder
and Alert settings as
required.
32
Configuring Reminders and
Alerts
The Reminders and Alerts list displays the
reminders and alerts that help the homeowner
know when to perform periodic maintenance.
NOTE: To use and receive email alerts, this
thermostat must be connected to the Internet via
a WiFi signal and the end-user must have a valid
email address.
HVAC Service
The HVAC Service (maintenance) reminder
generates an alert telling the homeowner that
regularly scheduled maintenance is required.
This reminder, along with technician contact
information, can be displayed on the screen.
If homeowners register their thermostats, the
reminders will be emailed to them and be
displayed in the web portal.
You can set the Last Service date, turn the
Reminder On or Off, and set the Frequency of
the maintenance interval in months.

Furnace Filter

Generates an alert that indicates it is time to
clean or replace the filter on the furnace. You
can set the Last Filter Change date, turn the
Reminder On or Off, and set the Frequency of
the maintenance interval.
UV Lamp
If the HVAC system uses a UV lamp for air
purification, the Smart Si thermostat can
generate an alert indicating that it is time to
clean or replace the lamp. You can set the Last