Approvals; Fcc Compliance Statement - Ecobee Smart Si Installation Manual

4

Approvals

This product was designed and built in accordance
to RoHS directive 2002/95/EC and contains no
hazardous substances as defined by this directive.

FCC Compliance Statement

This equipment has been tested and found to
comply with the limits for Class B digital devices,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment to an outlet on a different
circuit from the receiver.
Consult the dealer or an experienced radio/TV
contractor for help.
To satisfy FCC/IC RF exposure safety requirements,
a separation distance of 8 inches (20 cm) or more
should be maintained between this device and
persons. To ensure compliance, operation at closer
than this distance is not allowed.