Configuring The Reminder Alerts; Reset Installation Settings - Ecobee Smart Thermostat Installation Manual

are connected to the internet, your contact information,
including your company logo, will be automatically loaded
onto the thermostat.

Reset Installation Settings

Selecting this option will restore all the installation set-
tings back to the factory default. Any user setting (not re-
lated to the equipment installed) will remain unchanged.
Reset All Setting
Selecting this option will reset the entire Smart Thermo-
stat system back to the original factory default settings.
Configuring reminder alerts
To configure reminder alerts: The Reminders list displays the reminders and alerts
described below. Use the scroll bar at the right of the list to
From the Home
see all the settings.
Screen, press More.
Maintenance
The Maintenance reminder generates an alert telling
Press Settings and
the homeowner that regularly scheduled maintenance
select Reminders
is required.
from the list.
This alert, along with your contact information (if you
programmed the information into the system) will be
displayed on the touch screen. If the homeowner enrolls with
www.ecobee.com, this reminder will be e-mailed to them
and will also appear in their personal web portal.
Select this item to turn the reminder on or off, to show the
date of the last service and to set a reminder interval be-
tween 1 and 24 months.
Furnace Air filter
The Furnace Air Filter reminder generates an alert for
cleaning or changing the furnace air filter.
Select this item to turn the reminder on or off, and to select
the reminder interval (in hours or calendar months). This
reminder also displays the date of the last filter change.
21
Humidity Filter
The Humidity Filter reminder generates an alert for cleaning or
changing the humidity filter. Select this item to turn the reminder
on or off, and to select the reminder interval (in hours or calendar
months). This reminder also displays the date of the last filter change.
ventilator Filter
The Ventilator Filter reminder generates an alert for cleaning or
changing the ventilator filter.
Select this list item to turn the reminder on or off, as well as select
the reminder interval (hours or calendar months). This reminder
also displays the date of the last filter change.
Note: If a humidifier, dehumidifier or ventilator is not configured in
Accessory Relays, these options will not be displayed.
Temperature Alerts
The Smart Thermostat can generate alerts when the temperature in
the home reaches a pre-programmed level. This protects the home
from damage due to freezing and/or excessive heat.
This alert, along with your contact information (if you programmed
the information into the system) will be displayed on the touch screen.
If the homeowner enrolls with www.ecobee.com, this reminder will be
e-mailed to them and will also appear in their personal web portal.
low Temperature Alert - Select this item to set the temperature at
which the Smart Thermostat will generate a Low Temperature Alert.
The range can be:
Off – no alert will be generated
Set temperature range of 35 – 68°F (1.5 – 20°C)
High Temperature Alert - Select this item to set the temperature at
which the Smart Thermostat will generate a High Temperature Alert
message. The range can be:
Off – no alert will be generated
Set temperature range of 76 – 104°F (24.5 – 40°C).
22