List Of Alerts - Ecobee Smart Si Installation Manual

34
Enable Heating/Cooling Alerts
Select No to disable alerts for heat/cool error
conditions. If disabled, alerts indicating that the
system failed to heat or cool will not appear in the
screen, web portal, or emails.

List of Alerts

Below is a complete list of alerts. Depending on
your configuration, some of these may not apply.
Furnace Air
Filter
UV Lamp
Low Temp Alert
High Temp Alert
Heat Not Responding
Cool Not Responding
Maintenance
Reminder
Auxiliary Heat Run
Time
Auxiliary Outdoor
Temperature
Furnace filter needs to be
cleaned or changed.
UV lamp needs to be changed.
Temperature in the home is too
low.
Temperature in the home is too
high.
The system has failed to heat
the home.
The system has failed to cool the
home.
HVAC system due for regular
maintenance.
Auxiliary heat source is running
too often.
Your Smart Si thermostat
auxiliary heat has been called
to run when the outdoor
temperature exceeds the
programmed set point.