Component Identifi Cation - Shark KG-252437 Operator's Manual

(313137 &
403637 models)
ter Grip
ENGINE
Detergent
196cc, 208cc
Garden Hose
(not included)
Pump
Protector
— Develops high pressure.
Starter Grip— Used for starting the engine manu-
ally.
Spray Gun — Controls the application of water and
detergent onto cleaning surface with trigger device.
Includes safety latch.
Unloader valve— Safety device which allows pressure
tu be released when spray gun is closed
Detergent Injector — Allows you to siphon and mix
detergents.
Wand — Must be connected to the spray gun.
COMPONENT IDENTIFICATION
Hose and Gun
Hanger
Hose
Pump
Pressure
Nozzle
Inlet
Screen
Starter Grip
Spray Gun
Trigger
Hose and Gun
Hanger
Straight
Through Wand
High Pressure Hose — Connect one end to water
pump discharge nipple and the other end to spray
gun.
Pump Protector — Cycles fresh cool water through
pump when recirculating water reaches 140°F.
Note: If trigger on spray gun is released for more
than 1-2 minutes, water will leak from valve. Warm
water will discharge from pump protector onto
fl oor. This system prevents internal pump dam-
age.
v. 02/14
160cc, 190cc
Garden Hose
(not included)
Hose
Detergent
Pump
Protector
Detergent
Inlet
PUMP
Bucket
Screen
(not included)
High Pressure
Hose
7