Table of Contents
Related Manuals for Shark SJDDG-3011
Summary of Contents for Shark SJDDG-3011
- Page 1 SJDDG-3011 OPERATOR’S MANUAL MODEL # ORDER # 89143240-3 SJDDG-3011 1.107-063.0 SJDDG-3011-B 1.107-205.0 SJDDG-3011-C 1.107-206.0 To locate your local Shark Commercial Pressure Washer Dealer nearest you, visit www.sharkpw.com 8.914-324.0...
-
Page 3: Table Of Contents
Component Identification & Use, Drain Cleaning through Roof Vent ..........7 Operating Instructions....................... 9-11 Maintenance ..........................11 Exploded View, SJDDG-3011 ...................... 12 Exploded View, Parts List SJDDG-3011 ..................13 SHR-200CR Handy-Reel, Exploded View & Parts List ..............14 SHR-300 Exploded View & Parts List ..................15 Specifications Nozzles ......................... 16 Specifications Jetter Hoses, Adapters &... -
Page 4: Introduction
RISK OF FIRE. DO NOT operating. ADD FUEL WHEN OP- Shark reserves the right to make changes at any time ERATING MACHINE. WARNING: Risk of explosion — without incurring any obligation. do not spray flammable liquids. -
Page 5: Assembly
Then replace screen. 11. Shark will not be liable for any changes made to Connect one end of a garden hose (not included) to our standard machines, or any components not the water faucet —... -
Page 6: Component Identification & Use, Drain Cleaning
Shark Jetters ® OPERATOR’S MANUAL COMPONENT IDENTIFICATION AND USE DRAIN CLEANING Tool Box Hose Reel Pressure Gauge Engine Pump Unloader Valve Anti-Siphon Foot Pedal Pulse Valve Valve (optional) Drain 89143240-4 SJDDG-3011 • 8.914-324.0 • REV. 7/12... -
Page 7: Component Identification & Use, Drain Cleaning Through Roof Vent
COMPONENT IDENTIFICATION AND USE DRAIN CLEANING THROUGH ROOF VENT Foot Pedal Roof (optional) Vent Roof Hose Tool Box Reel Hose Line to Foot Pedal on Roof Pressure Gauge Anti-Siphon Unloader Valve Valve Pulse Valve 89143240-5 SJDDG-3011 • 8.914-324.0 • REV. 7/12... - Page 8 3/8" x 1/4" pressure which may damage the machine. 9.803-564.0 1/8" x 1/4" Check nozzles before and after each use for clogged holes which can cause pressure to increase to danger- 8.705-129.0 1/4" x 3/8" SJDDG-3011 • 8.914-324.0 • REV. 7/12...
-
Page 9: Operating Instructions
Some jet models may need the added length 6. Pull the starter grip lightly until resistance is felt, then of the accessory hose on the inlet side of the pedal. pull briskly. SJDDG-3011 • 8.914-324.0 • REV. 7/12... - Page 10 Use the smaller hose to clear the drain line. Detergent Injector (Optional) Ice Blockages The detergent injector is an option with the SJDDG-3011 High pressure water can be used to clear an ice block- and can be attached to the free end of the ball valve.
-
Page 11: Maintenance
Spark Plug Change Use SAE 30W Non-Detergent Motor Oil to full mark on dipstick or to dot on sight glass. ** Refer to engine manufacturer’s specifications for correct oil viscosity when adding to engine oil. SJDDG-3011 • 8.914-324.0 • REV. 7/12... -
Page 12: Exploded View Sjddg-3011
Shark Jetters ® OPERATOR’S MANUAL EXPLODED VIEW SJDDG-3011 Foot Pedal 89143240-2 Assy. SJDDG-3011 • 8.914-324.0 • REV. 7/12... -
Page 13: Exploded View Parts List Sjddg-3011
8.900-979.0 Label, Pulse On-Off 8.719-005.0 Washer, 1/4" x 1" 8.901-073.0 Decal, SJDDG-3011 Not Shown 9.802-058.0 Bumper, Rubber 1", w/Bolt 8.711-875.0 Swivel, 1/2" x 1/2" Pipe 8.918-201.0 Hose, 3/8" x 34", 3/8"MS x 3/8"MSW SJDDG-3011 • 8.914-324.0 • REV. 7/12... -
Page 14: Shr-200Cr Handy-Reel, Exploded View & Parts List
MNPT(SLD) x 3/8" MNPT(SWL) 1 8.940-343.0 Label, Discharge 8.711-866.0 Hose Reel, 13" 8.711-874.0 Swivel, 3/8" x 3/8" 9.803-551.0 Screw, 5/16" x 3/4" Whiz Loc 8.718-980.0 Washer, 5/16" 9.802-776.0 Nut, 5/16" ESNA 8.911-636.0 Hose Reel Guard SJDDG-3011 • 8.914-324.0 • REV. 7/12... -
Page 15: Shr-300 Exploded View & Parts List
Hose, 3/8" x 23", 2 Wire 8.706-690.0 Cover, Handle, LG 3/8" SMNPT x 3/8" SWMNPT 1 8.706-294.0 Bushing, 1/2" x 3/8", Steel 8.707-204.0 Valve, 3/8" Ball, Steel 9.802-069.0 Grip, 1", Handle, Waffle Not Shown SJDDG-3011 • 8.914-324.0 • REV. 7/12... -
Page 16: Specifications Nozzles
NOZZLE SETS Part Number Size Description Number of Nozzles 9.803-318.0 Nozzle Kit, 1/8" and 1/4" 9.803-319.0 Nozzle Kit, 1/8" and 1/4" 9.803-320.0 Nozzle Kit, 3/8" 9.803-321.0 Nozzle Kit, 1/4" 9.803-322.0 Nozzle Kit, 1/4" and 3/8" SJDDG-3011 • 8.914-324.0 • REV. 7/12... -
Page 17: Specifications Jetter Hoses, Adapters & Bushings
1/4" X 3/8" FPT X MPT 8.705-364.0 1/4" X 1/4" FPT X FPT 8.705-366.0 3/8" X 3/8" FPT X FPT 8.705-369.0 1/2" X 1/2" FPT X FPT 8.705-371.0 3/4" X 3/4" FPT X FPT SJDDG-3011 • 8.914-324.0 • REV. 7/12... -
Page 18: Pump Tx1510G8, Exploded View
Shark Jetters ® OPERATOR’S MANUAL PUMP MODEL TX1510G8 JET SET MODEL SJDDG-3011, PART #8.715-339.0 SJDDG-3011 • 8.914-324.0 • REV. 7/12... -
Page 19: Pump Tx1510G8, Parts List
Shark Jetters ® OPERATOR’S MANUAL PUMP MODEL TX1510G8 JET SET MODEL SJDDG-3011, PART #8.715-339.0 ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION 1-63120041 Manifold, 15mm 1-90360800 O-Ring (Kits 166, 1667) 1-99319200 Screw, M8 x 65 1-90260800 Seal, LP, 15mm (Kits 160, 166)3 1-96701400 Lockwasher, M8.4... -
Page 20: Hose And Spray Gun Assembly, Exploded View & Parts List
Shark Jetters ® OPERATOR’S MANUAL HOSE AND SPRAY GUN ASSEMBLY (8.904-453.0) SJDDG-3011 • EXPLODED VIEW AND PARTS LIST 89143240-10 ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION 8.904-452.0 Wand, VP ARO, Soap Nozzle 1 8.916-740.0 Hose, 3/8" x 50', 8.711-387.0 ... -
Page 21: Troubleshooting
Hot water in pump Do not run in bypass for more than 5 minutes. Do not let water supply exceed 140°F (60°C). IRREGULAR Worn or partially clogged nozzle Clean or replace nozzles. SPRAY PATTERN SJDDG-3011 • 8.914-324.0 • REV. 7/12... - Page 22 Nozzle worn or wrong size Replace part as necessary. TO PRESSURE Piston or valve worn Replace part as necessary. EXTREME Adjusting nut turned completely into unloader Back off adjusting nut. PRESSURE Clogged nozzle Clean or replace. SPIKES SJDDG-3011 • 8.914-324.0 • REV. 7/12...
-
Page 23: Warranty
Dealer or other sales or service outlet to another purchaser. Shark products that are sold by any distributor or retailer that is not an official authorized dealer or retailer of Shark products. Defects caused by acts of nature and disaster including, but not limited to, floods, fires, wind, freezing, earthquakes, tornadoes, hurricanes and lightning strikes. - Page 24 SHARK JETTERS SJDDG-3011 • 8.914-324.0 • PRINTED IN USA • REV. 7/12 ®...
Need help?
Do you have a question about the SJDDG-3011 and is the answer not in the manual?
Questions and answers