Shark STP-2015 Operating Instructions And Parts Manual
  1. Manuals
  2. Brands
  3. Shark Manuals
  4. Pressure Washer
  5. Stp-2015
  6. Operating instructions and parts manual

Shark STP-2015 Operating Instructions And Parts Manual

Hide thumbs Also See for STP-2015:
Table of Contents

Advertisement

Quick Links

MODEL: STP
OPERATING INSTRUCTION
AND PARTS MANUAL
I STP-2015
I STP-2310
I STP-3520
SHARK PRESSURE WASHERS I I I I I 4275 N.W. Pacific Rim Blvd. I Camas, WA 98607 I USA
For technical assistance or the Shark Dealer nearest you, call 1-800-771-1881.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STP-2015 and is the answer not in the manual?

Questions and answers

Related Manuals for Shark STP-2015

Summary of Contents for Shark STP-2015

  • Page 1 OPERATING INSTRUCTION AND PARTS MANUAL I STP-2015 I STP-2310 I STP-3520 SHARK PRESSURE WASHERS I I I I I 4275 N.W. Pacific Rim Blvd. I Camas, WA 98607 I USA For technical assistance or the Shark Dealer nearest you, call 1-800-771-1881.
  • Page 2 Height = 44" STP-2310 Length = 39" Width = 27" Height = 44" STP-3520 Length = 39" Width = 27" Height = 44" SERIAL NUMBER: DATE PURCHASED: FOR SALES AND SERVICE, PLEASE CONTACT: Shark STP Manual • Form 97-6153 • Revised 7/03...

  • Page 3: Table Of Contents

    How To Use The Detergent Injector ...... 8 Maintenance Schedule ........22 Preventative Maintenance ........9 Oil Change Record ..........22 Maintenance and Service ........ 9-11 Warranty STP Exploded View ........12-13 Shark STP Manual • Form 97-6153 • Revised 7/03...

  • Page 4: Introduction

    This ma- chine is to be used only by qualified operators. 8. Never make adjustments on machine while it is in operation. Shark STP • 97-6153 • Rev. 7/03...

  • Page 5: Installation

    20. Do not overreach or stand on unstable support. Keep Avoid small locations or areas near exhaust fans. good footing and balance at all times. 21. Follow the maintenance instructions specified in the manual. Shark STP • 97-6153 • Rev. 7/03...

  • Page 6: Component Identification

    Pressure Switch Pump Unloader Burner Motor Garden Hose (not included) Detergent Bucket (not included) Nozzle Coupler Detergent Suction Hose Trigger Insulated Variable Pressure Spray Gun Insulated Wand Control Handle High Pressure Outlet Hose Shark STP • 97-6153 • Rev. 7/03...

  • Page 7: Starting And Operating Instructions

    2. Connect water supply hose and turn on water. READ OPERATOR’S MANUAL THOROUGHLY 3. Check fuel tank and pump oil PRIOR TO USE. levels. Shark STP • 97-6153 • Rev. 7/03...

  • Page 8: How To Use The Detergent Injector

    7. When you finish washing, rinse by simply turning SOME DETERGENTS The machine can siphon and mix de- the variable pressure wand control handle clockwise MAY BE HARMFUL IF tergents with the use of Shark's de- INHALED OR to increase pressure. INGESTED. tergent injector kit.

  • Page 9: Preventative Maintenance

    Wipe off any oil spills and keep this equipment clean and dry. Deliming Coils: The areas around the Shark washer should be kept clean Periodic flushing of coils is recommended. and free of combustible materials, gasoline and other flam- 1. Fill a container or optional float tank with 4 gallons of mable vapors and liquids.

  • Page 10: Rupture Disk

    Side View Top View tion. Next slowly open the air shutter until white smoke just starts to appear. Turn air shutter halfway back to the black smoke position previously noted. Tighten locking screws. Shark STP • 97-6153 • Rev. 7/03...
  • Page 11 If the desired position cannot be obtained using only the air shutter, lock the air shutter in as close a position as can be obtained, then repeat the above procedure on the air band setting. Shark STP • 97-6153 • Rev. 7/03...

  • Page 12: Stp Exploded View

    STP SERIES PRESSURE WASHER OPERATOR’S MANUAL STP SERIES EXPLODED VIEW LEFT SIDE (Reversed (Reversed View View of Label) of Label) Detail See Control Panel Illus. To Fuel Tank Fuel Tank Shark STP • 97-6153 • Rev. 7/03...
  • Page 13 STP SERIES PRESSURE WASHER OPERATOR’S MANUAL STP SERIES EXPLODED VIEW RIGHT SIDE 28,29 Enlarged View Overload Button To Fuel Burner Filter Shark STP • 97-6153 • Rev. 7/03...

  • Page 14: Stp Exploded View Parts List

    Conduit 1.66 ft (352007) 2-2007 Nipple, 3/8" x 3/8" NPT ST Male1 5-23003 Pump, General T-9051-EBF (231001, 201501) 2-0031 Elbow, 3/8", Street 5-2303 Pump, General, TT-2035 EBF 10-09004 Label, Hot Water Outlet (352001) Shark STP • 97-6153 • Rev. 7/03...
  • Page 15 Burner, AFG, 120V, F4 Cone 90-4000 Washer, 1/4" 7-0101 Nozzle, Burner, 1.75 B 90° 7-01487 Insulation, Blanket, 18" x 52", (3520) Fiberglass 7-01244 Nozzle, Oil, HOL 1.00 A, 90° 90-20040 Nut, 3/8" Flange, Whiz Loc, NC 4 Shark STP • 97-6153 • Rev. 7/03...

  • Page 16: Control Panel Exploded View And Parts List

    L Bolt, 5/16" x 1", NCHH 90-1007 95-07104956 Box, Electric L Washer, 5/16" Flat 90-4001 6-05181A Locknut, 1/2" L Nut, 5/16" ESNA 90-2001 6-05152 Stain Relief, STRT, L Not Shown LQ TITE 3231 Small Shark STP • 97-6153 • Rev. 7/03...

  • Page 17: Hose & Spray Gun Assembly And Parts List

    (2015) 4-011184 Detergent Injector Assy, 3-5 GPM, 0.83 (3520) 4-12803025 Nozzle SAQMEG 2503, Green (2015) 4-011183 Detergent Injector Assy, 2-3 GPM, 0.70" (2015, 2310) 4-12803040 Nozzle, SAQMEG 4003, White (2015) L Not Shown Shark STP • 97-6153 • Rev. 7/03...

  • Page 18: Downstream Injector Assembly And Parts List

    3-12021 Injector, Detergent, Non-Adjust #3 (3520) 3-1202 Injector, Detergent, Non-Adjust #2 (2015, 2310) 2-9040 Clamp, Hose, UNI .46 - .54 4-02080000 Tube, 1/4" x 1/2", Clear Vinyl /ft.6 2-1904 Strainer, 1/4", Hose Barb Shark STP • 97-6153 • Rev. 7/03...

  • Page 19: Troubleshooting

    Obstruction in smoke stack Check for insulation blockage or other foreign objects. Soot build up on coils Clean coils with soot remover. Lime build up in coils Clean inside of coils using coil cleaner. Shark STP • 97-6153 • Rev. 7/03...
  • Page 20 Defective high limit switch (thermostat) Replace. Incorrect fuel nozzle size Call technical service for proper size. Insufficient water supplied Check GPM to machine. Restricted water flow Check nozzle for obstruction, proper size. Shark STP • 97-6153 • Rev. 7/03...
  • Page 21 Check water supply and connections on suction line. Broken or weak inlet or discharge Check and replace if necessary. valve springs Excessive matter in valves Check and clean if necessary. Worn bearings Check and replace if necessary. Shark STP • 97-6153 • Rev. 7/03...

  • Page 22: Maintenance Schedule

    Attention to regular preventative mainte- nance procedures will assist in preserving the performance of your equipment. Contact your Shark Pressure Wash- ers dealer for maintenance. Regular preventative maintenance will add many hours to the life of your pressure washer.

  • Page 23: Warranty

    TICULAR PURPOSE. SHARK does not authorize any other party, including authorized Dealers, to make any representation or promise on behalf of SHARK, or to modify the terms, conditions, or limitations in any way. It is the buyer’s responsibility to ensure that the installation and use of SHARK products conforms to local codes.
  • Page 24 N.W. Pacific Rim Blvd. • Camas, WA 98607 • 1-800-771-1881 Form #97-6153 • Revised 7/03 • Printed in U.S.A.

This manual is also suitable for:

Stp-3520Stp-2310

Table of Contents