Table of Contents
Advertisement
The LAN connection is optional unless POE is being used to power the AP .
For convenience, the adapter kit includes an FE coupler to connect RJ-45
cable ends together.
4.
Connect power to the Aruba AP 60/61.
C
:
AUTION
The Aruba AP 60/61 can receive electrical power using the following options:
POE–If connecting the Aruba AP 60/61 to a device that supplies IEEE 802.3af
compliant POE, no additional power connection is necessary.
Power Outlet
N
:
When the Aruba AP 60/61 is installed in an air-handling space, as
OTE
described in NEC (2002) Article 300.22(C), POE must be used instead
of a power outlet.
If local regulations and practices permit, connect the optional AC power
adapter (not included) to the DC power socket on the rear panel of the Aruba
AP 60/61 and plug it into an appropriate power outlet.
C
AUTION
N
:
The indicator LEDs on the Aruba AP 60/61 will remain dark during this
OTE
procedure.
5.
Set your local terminal to use the following communications:
T
2-1
Console Terminal Settings
ABLE
Baud Rate
Data Bits
9600
8
Establish console communication.
Press <Enter> a few times to establish communication between the Aruba AP
60/61 and terminal.
From the Aruba AP 60/61 console, access the apboot prompt.
6.
Be sure to comply with electrical grounding standards
during all phases of installation and operation of the AP .
Do not allow the Aruba AP 60/61 or optional power
adapter (if used) to be connected to or make contact with
metal or power outlets on a different electrical ground
than the device to which it is connected. Also, never
connect the AP to external storm grounding sources.
:
To prevent personal injury or damage to equipment,
use only the AC power adapter certified for this device
in the country where it is used.
Parity
None
Provisioning Access Points
Stop Bits
Flow Control
1
None
Aruba AP 60/61
Installation Guide
Chapter 2
15
Hide quick links:
Advertisement
Table of Contents
