Aux-In Operation; Bluetooth Operation; Using The Remote Control - Innovative Technology ITCDS-5000 Instruction Manual

Cd stereo system with bluetooth
Hide thumbs Also See for ITCDS-5000:
Table of Contents

Advertisement

External (auxiliary) audio sources such as tablets, smartphones or MP3 players, can
connect to the CD Stereo System via aux-in.
1. Press POWER button to turn the unit ON and then press FUNCTION button to
select "AUX".
2. Set the volume to the minimum level with the VOLUME KNOB.
3. Plug in an AUX-IN cable (not included) into the AUX-IN jack on the front of the
unit.
4. Plug the other end of the cable into the headphone or Line-Out jack of the
external source.
5. Turn on the external audio device and set it to play. Turn the external audio
device's volume up to 2/3. If necessary, adjust the volume on the CD Stereo
System by turning the VOLUME KNOB.
External devices that have a built-in Bluetooth feature can connect wirelessly to the
CD Stereo System.
GETTING CONNECTED
1. Press the FUNCTION button until the LED Display shows "BLUE".
2. Set the Bluetooth function of your external device to ON and begin searching for
devices.
NOTE: The effective distance between your external device and this apparatus
is 10 meters (33 feet).
3. Once "ITCDS-5000" appears on the paired devices list of your external device,
select it.
4. If you are asked for a password, enter "0000" or "1234".
5. A beep will be heard that indicates a connection has been established.
6. A few seconds later your Bluetooth connection should be ready to use.
PLAYING MUSIC FROM AN EXTERNAL BLUETOOTH DEVICE
1. Follow the "GETTING CONNECTED" steps above to pair your external device.
2. Turn on the music player program on your external device and set it to play.
Normally, you can control music playback with the PLAY/PAUSE, PREVIOUS
BUTTON and NEXT BUTTON on the CD Stereo System.
Note: Some function buttons may not work with all devices.
The Remote Control Unit can operate the unit from a distance. When operating the
remote control unit, point it towards the front panel of the unit.
Even if the remote control unit is operated within the effective range, remote
control operation may be impossible if there are any obstacles between the unit
and the remote control.

AUX-IN OPERATION

BLUETOOTH OPERATION

USING THE REMOTE CONTROL

9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents