Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS ..........................................................................................
PRODUCT OVERVIEW .................................................................................................................
SETUP / BASIC OPERATION .........................................................................................................
LISTENING TO A VINYL RECORD .................................................................................................
LISTENING TO A CD ....................................................................................................................
LISTENING TO THE RADIO ..........................................................................................................
LISTENING TO AN EXTERNAL AUDIO DEVICE (AUX MODE) ........................................................ 8
MAINTENANCE / PROPER HANDLING ........................................................................................ 8
SPECIFICATIONS ....................................................................................................................... 10
TROUBLESHOOTING GUIDE ...................................................................................................... 11
FCC STATEMENT ....................................................................................................................... 12
Retro 4-in-1 Wooden Music Center
MODEL: ITVS-325
2
4
6
6
7
8
Advertisement
Table of Contents
Related Manuals for Innovative Technology ITVS-325
Summary of Contents for Innovative Technology ITVS-325
-
Page 1: Table Of Contents
Retro 4-in-1 Wooden Music Center MODEL: ITVS-325 IMPORTANT SAFETY INSTRUCTIONS ..................PRODUCT OVERVIEW ......................... SETUP / BASIC OPERATION ......................LISTENING TO A VINYL RECORD ....................LISTENING TO A CD ........................LISTENING TO THE RADIO ......................LISTENING TO AN EXTERNAL AUDIO DEVICE (AUX MODE) ............8 MAINTENANCE / PROPER HANDLING .................. -
Page 2: Important Safety Instructions
CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure WARNING: Invisible laser radia on when open and interlock failed or defeated. - Page 3 If the unit will be unused for long periods of time, the batteries should be removed. Do not place this product on an unstable surface. The product may fall, causing serious injury to a child or adult and serious damage to the product. Use only with a stand, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. Move the appliance with care to avoid damage or injury. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way: the power‐supply cord or plug is damages, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. For products which incorporate batteries, please refer to local regulations for proper battery disposal. FCC WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance will void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. Those limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. If this equipment does cause harmful interference, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Move the transmitter to a different physical location. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. If you cannot eliminate the interference, the FCC requires that you stop using your headphones. ACCESSORIES INCLUDED • 3.5MM TO 3.5MM AUX CABLE • INSTRUCTION MANUAL • WARRANTY (BACK OF MANUAL) • 45 RPM ADAPTER ...
-
Page 4: Product Overview
PRODUCT OVERVIEW Front View 10. FUNCTION KNOB 1. PLAY/PAUSE Press to start playback. Rotate the knob to select a fun on During playback, press again to pause. (CD/PHONO/FM/AM). 2. STEREO SPEAKERS 3. STOP Press to stop playback or recording. 11. “VOLUME” KNOB Turn to adjust volume. 4. - Page 5 Parts of the Turntable Remove the white plastic needle guard before use. Keep it in a safe place and put it on when the unit is not in use. A. Turntable. B. Safety Screw (for transport) Before using the unit, turn the screw clockwise using a coin or screwdriver.
-
Page 6: Setup / Basic Operation
SETUP / BASIC OPERATION Setup 1. Remove white protective needle cover by gently pulling towards front of unit. 2. Remove any packaging materials from the unit. 3. Connect the AC power cord to a wall outlet. Note: To prevent interference, avoid bundling audio signal cables together with the AC power cord. Basic Operation 1. Push the POWER button to turn the unit on. 2. Select the source by rotating the FUNCTION knob to the corresponding position (CD / PHONO / FM / AM). 3. Rotate the VOLUME knob to adjust to the desired sound level. Listening through Earphones/Headphones (not included) For private listening, first reduce the volume level to minimum. Insert your headphones’ plug into the 3.5mm HEDAPHONE JACK on the front of the unit, then adjust the volume up by turning the VOLUME knob. ... -
Page 7: Listening To A Cd
Important: ‐ Closing the top cover will help prevent dust from settling on the turntable. ‐ Always relock the tone arm clip before transporting the unit. ‐ Do not place anything on top of the turntable cover, especially while playing a record. LISTENING TO A CD 1. Rotate the FUNCTION knob to the “CD” position (1). “‐ ‐” will blink for a few seconds. Note: When no disc is set, “NO” will appear on the display. 2. Press the OPEN/CLOSE ( ) button (2). 3. Place a disc on the tray with the printed label face up. 4. Press the OPEN/CLOSE ( ) button to close the tray. 5. Press the PLAY/PAUSE button ( ) to begin playback. 6. To temporarily pause playback, press the PLAY/PAUSE button ( ). Press again to resume. 7. To skip tracks forward or backward, press the corresponding skip button ( or ). Pressing ... -
Page 8: Listening To The Radio
1. Rotate the FUNCTION knob to the “CD” position to enter CD mode, then load a CD. 2. While the CD is stopped, press the PLAY MODE button. 3. “PROG” indicator blinks, and “01” appears on the display. 4. Press ( or ) to select a track number. 5. Press the PLAY MODE button again to set the current track. 6. “02” is displayed. Repeat steps 4 thru 5 to program the additional tracks. 7. When the selection of track numbers has been finished, press the PLAY/PAUSE button ( ) to start program playback. 8. To stop the playback, press the STOP ( ). To check the programmed order In the stop mode, press ( or ) repeatedly to show the track numbers that have been programmed. To add a track to the end of the programmed order: In the stop mode, press the PLAY MODE button. Select a track number by pressing ( or ), then press the PLAY MODE button. The current track will be added to the end of the program. To clear the programmed order: Press STOP ( ) when the CD is already stopped, or press OPEN/CLOSE, POWER, or rotate the FUNCTION knob to FM, AM or PHONO position. LISTENING TO THE RADIO 1. Rotate the FUNCTION knob to either “FM” or “AM” position. 2. ... - Page 9 • Do not expose discs to direct sunlight, high humidity, or high temperature for extend periods of time. • Printable CD‐R and CD‐RW discs are not recommended, as the label side may become sticky and damage the unit. • Use a soft oil‐based felt‐tipped pen to write the information on the label side. Never use a ball‐point or hard‐tipped pen, as doing so may damage the recorded side. • Do not use irregularly‐shaped CDs (octagonal, heart shaped, business card size, etc), as they will damage the unit. • Read all precautions supplied with any CD‐R or CD‐RW disc • Never handle a disc with dirty fingers. • Never insert a disc that has a crack on the surface. Handling Vinyl Records • Do not touch the record’s grooves. Only handle records by the edges or the label with clean hands. Touching the record surface will cause your record’s quality to deteriorate. • To clean a record, use a soft anti‐static cloth to gently wipe the record surface. • Keep records in their protective sleeves when not in use. • Always store records upright on their edges • Avoid placing records in direct sunlight, close to a heat source (radiators, stoves, etc.), or in a location subject to vibration, excessive dust, heat, cold or moisture. General Care • When removing the power plug from the wall outlet, always pull directly on the plug. Never pull the cord. • To keep the laser pickup clean, do not touch it, and do not forget to close the disc tray. ...
-
Page 10: Specifications
SPECIFICATIONS GENERAL Power Requirements AC 120 V~ 60 Hz Power Consumption Dimensions (W x H x D) 460x250x340mm (approx.) Weight 8.56 kgs (approx.) AMPLIFIER Output Power 2W + 2W Frequency Response 60 to 20, 000 Hz SPEAKER SYSTEM Type 1-way Impedance 8 ohms Input Power... -
Page 11: Troubleshooting Guide
TROUBLESHOOTING GUIDE Symptom Possible Cause Solution • • • Unit will not power on. Unit is unplugged. Connect the unit to the AC power supply. • No sound output from • The volume level is set too low. • Adjust the volume. speakers. • The input selector does not • Select the correct input match the playback source. source. • Noise/Distortion in sound • The unit is too close to a TV set or • Turn off the TV or other output. other interfering device. appliance, and relocate the unit. • Unit fails to respond. -
Page 12: Fcc Statement
FCC STATEMENT Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐Reorient or relocate the receiving antenna. ‐Increase the separation between the equipment and the receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. CALIFORNIA PROP 65 WARNING "WARNING" This product contains chemicals known to the State of California to cause birth defects or other reproductive harm. For more information on these regulations and a list of chemicals, log on the following website address: http://www.oehha.ca.gov/prop65.html 12 ... - Page 13 Innovative Technology Electronics Corp. Limited Warranty: 90 Days Labor, One Year Parts Innovative Technology Electronics Corp. (IT) warrants the product to be free from “Defects” in materials under normal use for a period of “One Year” from the date of the original purchase. The Warranty is “Not” transferable. IT agrees, within the initial “90 Day” period, to repair or replace the product if it is determined to be defective at “No Charge”. It is further agreed that IT will cover the cost to repair or replace damaged “Parts” only for a total period of “One Year” from the date of the original purchase. The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands, ear‐pads, or damage due to line power surges, connection to improper voltage supply or settings, misuse, mishandling, accident, acts of God or attempted repair by an unauthorized service agent. To obtain service, the purchaser MUST present an original sales receipt / proof of purchase. Please contact us at www.ithomeproducts.com to request an RMA (Return Material Authorization) number to return products for service or replacement. Returns without an RMA number on the package will be refused and returned to sender. Upon receipt of the returning item and our full inspection (IT) may issue a replacement to customer for the same item or of one that has equivalent value and features. To return an item, supply full name, return address, phone number, item purchased, receipt of purchase and reason for return to obtain RMA number. All returns must be in the original packaging or reasonable substitute to prevent damage. Customer “Must” include full name, shipping address and telephone number inside of package. No return will be shipped back to a PO Box or APO address. Please include your check or money order in the amount of • USD$5.00 for items $10.00 to $39.99 (Price Paid Per Unit) • USD$10.00 for items $40.00 to $99.99. (Price Paid Per Unit) • USD$16.00, for items $100.00 and up. (Price Paid Per Unit) • Shipping fees are non‐refundable to be payable to Innovative Technology Electronics Corp. (for handling and return shipping charges) (IT) will not be responsible for delays or unprocessed claims resulting from a purchaser’s failure to provide any / all of the necessary information. Send all inquiries or RMA request via our website www.ithomeproducts.com/support. Innovative Technology Electronics Corp. 1 Channel Drive Port Washington, NY 11050 Toll free: 1‐877‐483‐2497 Website for support: www.ithomeproducts.com/support ...
- Page 14 ...