Listening To A Cd - Innovative Technology ITCDS-5000 Instruction Manual

1. Press FUNCTION button until the display reads "CD".
2. Press the EJECT/ENTER button to open the CD door, put a CD onto the CD
tray with the printed label facing up (towards you). To close the CD door, press
EJECT/ENTER button again.
Note: Remember to remove the CD when you are finished listening.
To Play a CD When Stopped: Press the PLAY/PAUSE button. The disc will play
from track 1.
To Pause a CD While Playing: Press the PLAY/PAUSE button. The disc will pause
and pause indicator appears on the display. Press the PLAY/PAUSE button again to
resume playback.
To Stop a CD While Playing: Press the STOP button.
To Change Tracks: Press PREVIOUS BUTTON or NEXT BUTTON.
To Search During Playblack: Press and hold the PREVIOUS BUTTON or NEXT
BUTTON until the desired section is located. While searching, sound will be played
at a distorted speed. Playback returns to normal when the button is released.
REPEATING/RANDOM PLAYBACK OF A TRACK OR A CD
Press the REPEAT button on the remote control to circle the play mode:
Repeat 1---Press the REPEAT button on the remote control once and the
•
current track will be played continuously
Repeat All---Press the REPEAT button again and ALL tracks on the current disc
•
will be played continuously.
Normal playback --- Press REPEAT button again to resume normal playback.
•
Note: Pressing the STOP button will stop playback and the play mode will be
cleared.
PROGRAM PLAY
Program play must be set when the CD is stopped. You can program up to 20
tracks in any order.
1. Press STOP button and then press PROGRAM button on the remote control.
2. Press NEXT BUTTON / PREVIOUS BUTTON to select a track. The display
shows the selected track.
3. Press the PROGRAM button on the remote control to add the track into the
program list.
4. Repeat steps 2 and 3 until you complete the programming. You can program up
to 20 tracks.
To Start the Program Play: Press PLAY/PAUSE button.
To Pause or Stop a Program Play: Press PLAY/PAUSE or STOP button.
To Replay a Program: Press PLAY/PAUSE button.
To Review the Content of a Program: Press STOP button then keep pressing the
PROGRAM button to review the programmed tracks.
To Clear the Program: Press STOP button twice or open and close the CD door.

LISTENING TO A CD

7