Listening To The Radio; Listening To An External Audio Device (Aux Mode); Maintenance / Proper Handling - Innovative Technology ITVS-325 Instruction Manual

1. Rotate the FUNCTION knob to the "CD" position to enter CD mode, then load a CD.
2. While the CD is stopped, press the PLAY MODE button.
3. "PROG" indicator blinks, and "01" appears on the display.
4. Press ( or
5. Press the PLAY MODE button again to set the current track.
6. "02" is displayed. Repeat steps 4 thru 5 to program the additional tracks.
7. When the selection of track numbers has been finished, press the PLAY/PAUSE button (
program playback.
8. To stop the playback, press the STOP ( ).
To check the programmed order
In the stop mode, press (
To add a track to the end of the programmed order:
In the stop mode, press the PLAY MODE button.
Select a track number by pressing (
The current track will be added to the end of the program.
To clear the programmed order:
Press STOP ( ) when the CD is already stopped, or press OPEN/CLOSE, POWER, or rotate the FUNCTION
knob to FM, AM or PHONO position.
1. Rotate the FUNCTION knob to either "FM" or "AM" position.
2. Tune to the desired station using the Radio Tuner Knob.
Adjusting for Best Reception
AM broadcast: Rotate the unit to find the best position.
FM broadcast: Extend and reposition the FM antenna.
LISTENING TO AN EXTERNAL AUDIO DEVICE (AUX MODE)
In AUX (auxiliary) mode, this unit can play audio from an external audio source (iPod, MP3 Player, Portable CD
Player, etc.)
1. Plug one end of the AUX IN cable (included) into the AUX IN jack (at the side
of the unit).
2. Plug the other end of the cable into the headphone jack of the external
audio source.
3. Other working function will be deactivated.
4. Turn on external audio source and set it play.
5. Adjust the sound on the external audio source if possible.
6. Then adjust the sound on the unit accordingly.
Compact Disc Handling
•
Always place the disc on the disc tray with the label side facing upward (compact discs can be played only on one side)
•
To remove a disc from its storage case, press down on the center of the case and lift the disc upward, holding it carefully
by its edges.
•
To clean a disc, wipe the surface from the center hole outward towards the outer edge with a soft, dry cloth.
•
Never use chemicals such as record spray, antistatic sprays or fluid, benzine or thinner to clean discs; they will
irreparably damage the disc's plastic surface.
•
Discs should be returned to their cases after use to protect from dust and scratches.
) to select a track number.
or ) repeatedly to show the track numbers that have been programmed.
or
LISTENING TO THE RADIO
MAINTENANCE / PROPER HANDLING
), then press the PLAY MODE button.
8
) to start