REMOTE CONTROL .................................................................................................................................... 6
LISTENING TO A VINYL RECORD ............................................................................................................... 7
LISTENING TO A CD .................................................................................................................................... 8
LISTENING TO THE RADIO ....................................................................................................................... 10
Do you have a question about the ITVS-750 and is the answer not in the manual?
Questions and answers
Harold K. Paulett
March 14, 2025
The turntable does not turn at the speeds listed on the selector. How do I fix this issue on ITVE-752
1 comments:
Mr. Anderson
March 14, 2025
To fix the speed issue on the Innovative Technology ITVS-750 turntable, you should replace the turntable belt. A new precision flat belt restores speed accuracy, reduces wow and flutter, and ensures smooth rotational speed. The replacement belt is designed for higher torque and quiet operation, improving playback performance.
This answer is automatically generated
Subscribe to Our Youtube Channel
Related Manuals for Innovative Technology ITVS-750
MODEL: ITVS-750 WOODEN MUSIC CENTRE WITH RECORDABLE CD PLAYER IMPORTANT SAFETY INSTRUCTIONS ....................... 2 PRODUCT OVERVIEW ..........................3 SETUP / BASIC OPERATION ........................6 REMOTE CONTROL ............................ 6 LISTENING TO A VINYL RECORD ....................... 7 LISTENING TO A CD ............................ 8 LISTENING TO THE RADIO ........................
CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure WARNING: Invisible laser radiation when open and interlock failed or defeated.
17. Move the appliance with care to avoid damage or injury. 18. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damages in any way: the power-supply cord or plug is damages, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped 19.
Page 4
In CD Mode, press once to skip to the 7. REMOTE SENSOR. When using the next/previous track. Press and hold to fast remote control, point it towards this sensor. forward/rewind. 8. RADIO TUNER DISPLAY 21. “REC LEVEL” KNOB In record pause 9.
Page 5
A. FM wire antenna While tuned to a station in FM mode, extend the wire and reposition to adjust for best reception. B. AUX IN jacks For audio sources with RCA jacks, use plug on end of the RCA cable into these jacks and the other into the audio source.
Battery Replacement When the distance required between the remote control unit and main unit decreases, it is necessary to replace the battery with new ones. Battery Precautions Be sure to insert the batteries with correct positive “+” and negative “-” orientation.
9. When playback is finished, the tone arm will automatically return to its holder. Then the turntable will stop. To stop playback manually, slightly lift the tone arm using the cue lever and return it to the tone arm holder. Important: - Closing the top cover will help prevent dust from settling on the turntable.
Page 9
Display Each time the DISPLAY button is pressed, the display mode will cycle between the following options: - Track Number + Track Play Time (Default Display Mode) - Track Play Time Countdown - Track Play Time - CD Play Time Countdown Repeat Playback Each time the REPEAT button is pressed, the repeat mode will cycle through the following options:...
6. “P-02” is displayed. Repeat steps 4 thru 5 to program the additional tracks. 7. When the selection of track numbers has been finished, press the PLAY button ( ) to start program playback. 8. To cancel the program mode, press the STOP ( ). To check the programmed order In the stop mode, press ( ) repeatedly to show the track numbers that have...
Important: If both the front and rear AUX INs are connected to AUX IN cables at the same time, only the front one will be active. AUX OPERATION Please use this function to record from other sources such as CDs, karaokes and radio. We also recommend using this function to make the cassette tape to CD recording much easier.
Note: Be sure not to set the recording volume too low – doing so will result in very low playback volume levels. 3. Once the recording volume level is set, reset the audio source so it is ready for recording. Entering Recording (Play) Mode 1.
If a CD-RW disc has been finalized, you will need to unfinalize it prior to erasure. With a CD-RW, it is possible to erase either the last recorded track, or the entire disc. All erasing processes are permanent – they cannot be undone.
Page 15
• In order to shut off the power to this product completely, unplug the power cord from the wall outlet. Be sure to unplug the unit if you will not intend to use it for an extended period of time.
Specifications GENERAL Power Requirements AC 120 V~ 60 Hz Power Consumption Dimensions (W x H x D) 510x300x340mm (approx.) Weight 12 kg . (approx.) AMPLIFIER Output Power 5 W + 5 W Frequency Response 60 to 20, 000 Hz SPEAKER SYSTEM Type 1-way Impedance...
• It fails to respond. • It might result from external • Disconnect the power cord factors such as ESD and external audio device. (Electro-static discharge). Re-plug the power cord after one minute.
Page 18
CALIFORNIA PROP 65 WARNING "WARNING" This product contains a chemicals known to the State of California to cause birth defects or other reproductive harm. For more information on these regulations and a list of chemicals, log on the following website address : http://www.oehha.ca.gov/prop65.html...
Page 19
Warranty is “Not” transferable. IT agrees, within the initial “90 Day” period, to repair the product if it is determined to be defective at “No Charge”. It is further agreed that IT will cover the cost to repair or replace damaged “Parts” only for a total period of “One Year” from the date of the original purchase.
Need help?
Do you have a question about the ITVS-750 and is the answer not in the manual?
Questions and answers
The turntable does not turn at the speeds listed on the selector. How do I fix this issue on ITVE-752
To fix the speed issue on the Innovative Technology ITVS-750 turntable, you should replace the turntable belt. A new precision flat belt restores speed accuracy, reduces wow and flutter, and ensures smooth rotational speed. The replacement belt is designed for higher torque and quiet operation, improving playback performance.
This answer is automatically generated