Irc-6 (Infrared Remote Control 6) Operation - Chauvet Kinta FX User Manual

IRC-6 (Infrared Remote Control 6) Operation

Note: Make sure to point the IRC-6 directly at the receiver on the product.
Note: The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a button is
pressed, try pressing <BLACK OUT>. You may have inadvertently activated Black Out.
Kinta FX User Manual Rev. 1
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
·
Press <AUTO> on the IRC-6.
·
Press any number between <1> and <7> to choose your auto program.
<0>
o
<1> Laser/Strobe/Beam
o
<2> Beam/Strobe
o
<3> Beam/Laser
o
<4> Laser/Strobe
o
·
Press <+> or <–> to either increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
·
Press <SOUND> on the IRC-6.
·
Press any number between <1> and <7> to choose your auto program.
<0>
o
<1> Laser/Strobe/Beam
o
<2> Beam/Strobe
o
<3> Beam/Laser
o
<4> Laser/Strobe
o
Speed Adjust
To adjust the speed of the auto program:
·
Press <SPEED> on the IRC-6.
·
Press <+> or <–> to increase or decrease, respectively
Strobe Adjust
To adjust the speed of the auto program:
·
Press <STROBE> on the IRC-6.
·
Press <+> or <–> to increase or decrease, respectively
Beam Head Color Modes
To set a specific color output for the Beam effects:
·
Press <R> for red.
·
Press <G> for green.
·
Press <B> for blue.
·
Press <W> for white.
Miscellaneous Operation
To black out the lights:
·
Press <BLACK OUT> on the IRC-6. This will turn off all the lights until the button is pressed
again.
<5> Beam Only
o
<6> Strobe Only
o
<7> Laser Only
o
<8>
o
<9>
o
<5> Beam Only
o
<6> Strobe Only
o
<7> Laser Only
o
<8>
o
<9>
o
Page 25 of 117