Mounting; Orientation; Rigging; Mounting Diagram - Chauvet Kinta FX User Manual

Mounting

Orientation

Rigging

Mounting Diagram

Page 18 of 117
Before mounting the product, read and follow the safety recommendations indicated in the
Safety Notes. Use at least one mounting point per product. Make sure the mounting clamp
(such as CLP-15 from Chauvet) is capable of supporting the weight of the product. For our
Chauvet line of mounting clamps, go to www.chauvetlighting.com/cables-clamps-main.html.
The Kinta FX must be mounted in a position that includes planning for safe laser usage. In
addition, make sure adequate ventilation is provided around the product.
· Before deciding on a location for the product, always make sure there is easy access to the
product for maintenance and programming.
· Make sure that the structure or surface onto which you are mounting the product can support
the product's weight (see
· When mounting the product overhead, always use a safety cable (such as CH-05 from
Chauvet). Mount the product securely to a rigging point, such as an elevated platform or a
truss.
· When rigging the product onto a truss, you should use a mounting clamp of appropriate
weight capacity. The bracket has a 13-mm hole, which is appropriate for this purpose.
· The bracket adjustment knobs allow for directional adjustment when aiming the product to
the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could
damage the knobs.
Mounting Clamp
Safety Cable
Technical Specifications).
Mounting Bracket
Bracket Adjustment
Knob x2
Kinta FX User Manual Rev. 1