First Degree Fitness Fluid Cycle XT E720 Owner's Manual page 7

E720 Assembly Instructions
Note: Allow 15 minutes for the thread-locker to activate before first time use.
Check pedal tightness on a regular basis and tighten as needed with a 15mm wrench.
Step 5: Secure right pedal onto Crank arm. The pedal threads have a blue
coating which will feel very tight when threaded onto the crank arm. This is a
type of thread locker, and once in contact with the crank arm threads will acti-
vate in approximately 15minutes.
Caution! Extreme over-tightening could damage the aluminum threads on the
crank arm.
7