Viewing The Connections - Side Connectors; Power Connection - Luxor LX22915 FHD LED Operating Instructions Manual

WARNING: You cannot use PC and YPbPr at the same time.
5. S/PDIF Coaxial Out
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input.
6. DC 12 V Input is used for connecting the supplied power adaptor.

Viewing the Connections - Side Connectors

1. CI Slot is used for inserting a CI card. A CI card allows you to view all the channels
that you subscribe to. For more information, see "Conditional Access" section.
2. Side USB input.
3. TV control buttons.
4. Side audio-video connection
of external devices. To make a video connection, you must use the supplied AV
connection cable for enabling connection. First, plug singular jack of the cable to the
TV's Side AV socket. Afterwards, insert your video cable's (not supplied) connector
into the YELLOW input (located on the plural side) of the supplied AV connection
cable. Colours of the connected jacks should match.
To enable audio connection, you must use RED and WHITE inputs of the side AV
connection cable. Afterwards, insert your device's audio cable's connectors into
the RED and WHITE jack of the supplied side AV connection cable. Colours of the
connected jacks should match.
Note: You should use audio inputs of side AV connection cable (RED & WHITE)
to enable sound connection when connecting a device to your TV by using PC or
COMPONENT VIDEO input.
5. Headphone jack is used for connecting an external headphone to the system.
Connect to the HEADPHONE jack to listen to the TV from headphones (optional).

Power Connection

IMPORTANT: The TV set is designed to operate on 12 V DC. For this, an adaptor is used which gives
12 V voltage. Connect this adaptor to a system that supplies 110-240V AC,50/60Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains .
03_MB60_[GB]_3900UK_IDTV_TC_BRONZE17_22915WLED_woypbpr_MOBIL_10070457_50177762.indd 71 03_MB60_[GB]_3900UK_IDTV_TC_BRONZE17_22915WLED_woypbpr_MOBIL_10070457_50177762.indd 71
outputs digital audio signals of the currently watched source.
input is used for connecting video and audio signals
To POWER
INPUT DC 12 V
terminal
AC adapter
English - 71 -
V+
V+
.
V- V-
13.10.2010 11:11:33 13.10.2010 11:11:33