Entering Tools Mode - Xerox DocuColor 2045 System Administration Manual

T M
O O L S O D E

Entering Tools Mode

1– 2
Use the following method to enter the Tools Mode:
1
Press the Access button on the Control Panel. The Access Password Screen
appears.
2
Use the keypad to enter the Tools Mode password. The default password is five
1s (1 1 1 1 1). For security reasons, only asterisks are displayed on the screen.
3
Touch the Enter button on the screen. The Pathway Options screen appears, as
shown in Figure 1.
NOTE: It is recommended that you change the Tools password as soon as
possible after installing the DocuColor 2060/2045 to prevent unauthorized
access to the Tools Mode. The procedure for changing the password is in Chapter
4 of this manual.
4
Touch the Tools Pathway button on the screen. The Machine Defaults 1 screen
appears.
D C
O C U O L O R
Figure 1. Pathway Options screen
20 6 0/ 20 4 5 S
Y S T E M
A G
D M I N I S T R A T I O N U I D E