Manual Adjust - Xerox DocuColor 2045 System Administration Manual

T M
O O L S O D E

Manual Adjust

The Manual Adjust feature enables you to modify each color (CMYK) for Low,
Mid, and High densities. You can also modify the same settings for the highlight
values of each screen.
KEY POINT: Manual Adjust should be used only by an expert in color science.
Any changes made on this screen remain in effect for all future scanned jobs,
until it is changed again.
1
Touch the Manual Adjust button on the Auto Color Calibration screen. The
Manual Adjust screen appears.
Figure 15. Manual Adjust screen
The value displayed for each setting, 128, is the mid point between 0 and 255.
Entering a lower number produces a lighter color. Entering a higher number
produces a darker color. If you make any changes, run test prints to evaluate the
output prints.
D C 2 0 60 /2 0 45 S A G
1–19
O C U O L O R Y S T E M D M I N I S T R A T I O N U I D E