Features & Specifications - Lopi Answer Wood Stove Owner's Manual

6
Installation Options:
• Freestanding
• Freestanding in an Alcove
• Freestanding in a Mobile Home
• Masonry Fireplace Insert
• Factory-Built (Z.C.) Fireplace Insert
Heating Specifications:
Approximate Maximum Heating Capacity (in square feet)*
Maximum BTU's per Hour (Cord Wood Calculation)
Overall Efficiency (Oregon Method)
Maximum Burn Time
* Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside
temperature. It is also affected by the quality and moisture level of the fuel.
Dimensions:
Note:
Measure side, corner,
and back clearances
from the stove top.
The flue collar protrudes
3/4" above the stove top
Insert Dimensions:
Depth into Fireplace** ........13-1/2"
Onto Hearth*** ....................3"
* For inserts, add 3/4" for the flue collar.
** ZC (metal) fireplaces requre 14-1/2".
*** Does not include hearth protection.
Emissions:
3.3 Grams Per Hour (EPA Phase II Approved) – Tests conducted by E.E.S.P.C.
Travis Industries
Features & Specifications
Features:
• EPA Phase II Approved
• 1.6 Cubic Foot Firebox Volume
• Single Operating Control
• Accepts Logs Up to 18" Long
• Steel Plate Construction (5/16" & 3/16")
• Heavy Duty Refractory Firebrick
• Optional High-Tech Blower
5-7/8"
23-5/8"
16-1/4"
93508131
750 to 1,400 (stove)
750 to 1,200 (insert)
66,800
70.0 %
Up to 8 Hours
20"*
Height:
Steel Legs (discontinued)..26-1/2"
Sculptured or Cast Legs....27-7/8"
Pedestal.............................31-7/8"
4 020327