Surround Panels (see part #'s below)
Rectangular Panels:
Surround Panel Size
8"
10"
Arched Panels (Part # 99300108)
INSTALLATION INSTRUCTIONS
1.
With the insert 12" from the fireplace, install the side surround panels (see the directions
below).
a
Pry the button plugs
from both sides of the
insert. Pre-thread the
holes on the insert with
the screws included in
the surround panel kit
(both sides).
2.
Adjust the position of the side panels so they are: 1) aligned with the top of the insert; 2)
both the same distance back from the front of the insert; 3) perpendicular to the floor (use
the top panel, if necessary, to judge alignment). Tighten the screws that hold the side
panels in place.
Travis Industries
Optional Equipment
Size on Appliance (Including Trim)
40 1/8" width by 28 1/4" height
44 1/8" width by 30 1/4" height
Standard
Screwdriver
93508131
40-1/4"
31-3/4"
24"
Radius = 40-3/4"
41
PART #
99300106
99300107
b
Attach the side
surround panels
with the included
screws.
5/16" Nutdriver
4 020327