page | 4 CAUTION Risk of Electrical Shock! DO NOT OPEN! ATTENTION ! RISQUE DE CHOC ! ÉLECTRIQUE PAS OUVRIR ! The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
These Episode® Amplifiers are built on the latest digital technology and deliver efficient, clean power to every room. Each model is designed to produce the subtle details of music, while having the flexibility to meet a variety of installations.
page | 8 EA - DYN - 8D - 100, EA - DYN - 12D - 100, EA - DYN - 16D - 100 FEATURES FUSE RATING BRIDGE BRIDGE T6.3AH 250V ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 ZONE 8...
POSITIONING YOUR EPISODE AMPLIFIER Episode amplifiers are designed to help deliver a great audio experience that makes your music come alive for years to come. However, where you place the amplifier can have a large effect on the performance that you receive and the life of the unit.
Page 10
page | 10 Stereo Bridged Output from Local Source Source ‒ To Bridge Bridge Input Switch Selector FUSE RATING BRIDGE BRIDGE Switch T6.3AH 250V ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 BRIDGE BRIDGE BRIDGE BRIDGE BRIDGE...
TROUBLESHOOTING Episode amplifiers are designed to function trouble-free. Most problems that occur are due to simple issues. If having trouble, check the list of simple fixes below. If the problem persists, contact Episode technical support at 866-838-5052. • Power cable to the amplifier is incorrectly connected or plugged into an outlet that does not have power.
WARRANTY 2-Year Limited Warranty Episode® Amplifiers have a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to the SnapAV or a designated service center with prior notification and an assigned Return Authorization (RA) number.