Window Kit Installation; Exhaust Hose Connection - Kenmore 407.83126 Use & Care Manual

LOCATION OF THE PORTABLE AIR CONDITIONER (Fig. 4)
12" (30 cm)
12" (30 cm)
1. Select a location near a window and electrical outlet.
2. Position the unit in a fiat, spacious location with a minimum of one foot (30 cm) between
the air outlets and any walls or furniture.
3. Do not operate the unit in extremely moist areas such as a sauna.
WINDOW KIT INSTALLATION
The Window Kit (included) contains three sliding pieces, and can be adjusted to fit most
standard vertical and horizontal windows (see Fig. 5 & Fig. 6).
Horizontal Window
i r!_ iii i
Vertical
Window
For very wide windows, use all three pieces. The maximum width is 58". For narrow windows,
you may have to cut clown the end of the piece with the hose attachment hole. The minimum
width is 10". Cut the window kit using a strong pair of scissorsor heavy duty cutting pliers.
Do not cut into the exhaust hole.
EXHAUST HOSE CONNECTION
The exhaust hose must be attached for cooling and dehumidifi-
cation. When installing the exhaust hose, try and keep it as fiat
as possible. The tess angles and bends in the hose, the better the
unit will perform. If bending or an angle Is necessary, usesingle
90 ° angles (Fig, 7). Multiple bends wil! decrease performance
and efficiency. Make surethere are no low spots to prevent
moisture collection. Attach window kit adapter to window kit by
placing adapter into exhaust hole. Pushforward until it is se-
cured.
iEL Z
22" Maximum
10