Replacing Consumable Parts; Replacing The Wiper - Roland Texart RT-640 User Manual

Replacing Consumable Parts

Replacing the Wiper

The wiper is a component that is used when cleaning the print heads. When the screen shown below is dis-
played on the display screen, it is time for replacement. Replace it with a new item.
For information about purchasing wipers, contact your authorized Roland DG Corp. dealer.
CAUTION
3
Required items
1.
Enter the wiper replacement menu.


Remove any media.

Press



76
Be sure to perform operations as specified by the instructions above,
and never touch any area not specified in the instructions.
Failure to observe these precautions may cause the machine to move sud-
denly, resulting in injury.
Wipers
When the screen on the left is displayed, press
.
Press
at left.
Press
Press
Press
The print-head carriage moves to a location where wiper replacement
is possible, and then the screen shown on the left appears.
Tweezers
several times to display the screen shown
, and then press
.
.
.
twice.