Manual Cleaning - Roland Texart RT-640 User Manual

Manual Cleaning

Important notes on this procedure
 Before attempting this operation, remove any media.
 To prevent the print heads from drying out, finish this procedure in 30 minutes or less. A warning
beep sounds after 30 minutes.
 Never use any implements other than the included cleaning sticks. Cotton swabs or other lint-
producing items may damage the print heads. If you use up the cleaning sticks, purchase new
ones from your authorized Roland DG Corp. dealer.
 Use one cleaning stick per cleaning session. Reusing cleaning sticks may adversely affect printing
results.
 Do not put a cleaning stick that has been used for cleaning into the cleaning liquid. It will dete-
riorate the fluid.
 Never rub the print head surface (nozzle surface).
If a warning beep sounds during cleaning
A warning beep sounds 30 minutes after operation starts. Halt operation temporarily, and attach the
left and right covers and close the front cover following the instructions in
(page 68). Press
first procedure.
CAUTION
Required items
Cleaning stick
1.
Enter manual cleaning mode.

Remove any media.

Maintenance that Should Be Performed More Than Once a Month
to finish manual cleaning mode. After that, restart operation from the
Be sure to perform operations as specified by the instructions above,
and never touch any area not specified in the instructions.
Failure to observe these precautions may cause the machine to move sud-
denly, resulting in injury.

"Manual Cleaning"

Close the front cover.
3
3.
step
65