NEC Versa LX User Manual page 58

LCD Panel Assembly
1. Remove six screws (
2. Disconnect the LCD panel cable at P3 on the Main board.
3. Lift the LCD panel from the bottom cover assembly.
A – Screws
Bridge Battery, CMOS Battery, CPU Assembly and Speaker Assembly
1. Disconnect the Speaker assembly cable from P23 (
2. Lift the left and right speaker from the bottom assembly being careful not to
stretch the cable
3. Disconnect the Bridge battery cable from P11 (
4. The Bridge battery (
to remove.
5. Disconnect the CMOS battery cable from P13 on the main board.
6. The CMOS battery (
gently pry up to remove.
7. Remove one screw (
Main board.
3-10 Disassembly and Reassembly
) on the back as shown in the following figure.
A
Back of system
) is held in place by a double-sided tape gently pry up
E
C ) is held in place by a double-sided pressure tape
) and lift to disconnect the CPU subassembly from the
B
).
A
D ) on the main board.