Intel Landesk Client Manager - NEC Versa LX User Manual

n
Selection Tabs — Located just below the title bar, each tab represents a
software category. The selection tabs include applications, drivers,
utilities, Internet browsers, and the online NEC Help Centre.
n
Description — Located in the bottom portion of the dialog box, the text
describes the selected or highlighted software category or application,
driver, etc.
n
Install — Clicking the Install button installs the selected software.
n
Exit — Clicking the Exit button closes the Applications and Drivers CD
dialog box.
Once the Applications and Drivers CD dialog box appears, follow these steps to
install the desired software.
1. Click the selection tab of your choice.
2. Click the plus (+) box beside the desired application, driver, etc. to expand
the selection.
3. Click the Installation selection to activate the install button.
4. Click the Install button to install your selection.
5. Click Exit to close the Applications and Drivers CD dialog box.
6. Follow the on-screen instructions to install your selection.
7. Remove the CD from the CD-ROM reader when the installation is complete.

Intel LANDesk Client Manager

Intel LANDesk Client Manager provides the capability for managing a variety
of components within a PC system. These components include network
interface cards, memory modules, printers, and software applications. LANDesk
Client Manager uses the Desktop Management Interface (DMI) standard
established by the Desktop Management Task Force (DMTF).
monitors your system for optimal system performance. This
monitoring function interrupts the auto suspend feature that
invokes after 30 minutes of inactivity.
If you install Intel's LANDesk Client Manager the Versa auto
suspend feature may be disabled.
2-30 System Configuration and Setup
Note:
Intel LANDesk Client Manager continuously