NEC Versa LX User Manual page 53

removing the device, the device casing catches on the inside
of the latch.
Keyboard
Use the following steps to remove keyboard and access switch settings.
1. Open the LCD panel.
2. Locate and remove the rubber cap and the Phillips-head screw on the upper
left hand corner of the keyboard cover of the Versa.
3. Press down using a slight pressure on the right hand side of the keyboard
retainer and slide to the left.
4. Gently lift up the edge of the keyboard nearest the LCD and slide the
keyboard toward the LCD screen to release the tabs that secure it.
Note:
If you release the latch before completely
Locating the rubber cap
Keyboard retainer
Disassembly and Reassembly 3-5