NEC Versa LX User Manual page 43

Using HDPREPEZ in Windows NT
In Windows NT, run the HDPREPEZ utility if you increase the memory
capacity in your Versa beyond the factory installed base memory.
Follow these steps to run the HDPREPEZ utility.
1. Close all background applications before running the HDPREPEZ utility.
2. Go to Start, Programs, AMI Save to File.
3. Select Create STF File.
A DOS box displays and advises you to close all background applications.
The message also indicates that your system will reboot when the process is
complete. Finally, the message prompts you to "Proceed Y/N?"
4. Enter
A file, large enough to accommodate your system's memory is created on
the hard disk drive. When the process is complete, your system reboots.
2-28 System Configuration and Setup
to create the STF file.
Y