NEC Versa LX User Manual page 34

To set the date use the
the
n
System Memory — Displays the amount of system memory.
n
Time — Set the time, enter the current hour, minute, and second in
hr/min/sec, 24-hour format.
To set the time use the Tab or arrow keys to move from field to field.
Use the
n
Diskette Drives — Lets you designate the drive type for your diskette
drives.
n
Internal Hard Disk Drive — Allows you to enable or disable the internal
hard drive(s) in your system.
n
Docking Station Drives — Enable and disable the drives installed in a
docking station. (These options are only available when the Versa is
docked.)
Advanced CMOS Setup
Advanced CMOS settings let you define the following functions.
n
LCD Panel View Expansion — Specifies whether the panel view is
reduced/off or expanded/on.
n
PS/2 Port Hot Swap — Specifies whether or not you can swap a PS/2
device during system operation.
n
Internal Mouse — Specifies whether or not you can use both the internal
and the external mouse.
System Security Setup
n
Change Supervisor Password — Allows you to establish password
protection for entering the BIOS setup utility, booting the system, and
resuming from suspend.
n
Change User Password — Allows you establish a user password once a
Supervisor password is set.
n
Boot Password Required — Indicates whether or not a password is
required during system boot.
n
Resume Password required — Indicates whether or not a password is
required during system resume.
Tab
or key to change the numbers within each field.
PgUp PgDn
PgUp or PgDn
or arrow keys to move from field to field. Use
key to change the numbers within each field.
System Configuration and Setup 2-19